PINNACLE TOP how to raise the V neck How to raise the V neck on the Pinnacle Top Papercut Patterns April 27, 2022 STEP 1 Tape the front body piece to a new sheet of paper. STEP 2 Draw a straight line continuing hemline toward centre front. With a set square, square a line up from hemline to meet the centre front point of neckline, extending your line up above. It should look like this. STEP 3 Measure upwards from your neck point the amount you want to raise it and mark. STEP 4 Draw a line from this new point up to the top notch on neckline. STEP 5 Draw a straight line from your new neck point down to the hem line. Transfer the notch onto the new line. STEP 6 Lower Triangle. Square across from the fold line of front triangle piece about 8cm/3” from top edge. Cut across line. STEP 6 Open up triangle piece the same amount you raised the V keeping the fold line of triangle on a straight line. STEP 8 Re draw the side of triangle. Draw a straight line from the top edge to the hem line. Transfer notch onto the new line. STEP 11 Square a line out from neck notch. Cut through the line. STEP 12 STEP 13 voila! Source: https://www.papercutjournal.com/pattern-adjustments/how-to-raise-the-v-neck-on-the-pinnacle-top